Abst:Safety Harness With Lanyard
A safety harness with a lanyard is an important piece of equipment for workers who have to work at heights. It prevents w
Safety Harness With Lanyard
A safety harness with a lanyard is an important piece of equipment for workers who have to work at heights. It prevents workers from falling, and it is a lifeline in case of emergency. It is essential to use this type of equipment properly, however, so it is best to check it carefully.
Depending on the job, you may need different types of safety harnesses and lanyards. For example, if you are working on a construction site, you might need a lanyard that is made of shock-absorbing materials. In addition, you need to know the proper attachment methods to ensure that the lanyard is not tangled up with anything. You must also make sure the lanyard is not too tight, as it could cause the wearer to lose balance.
Some of the key features you should look for in a safety harness are its weight capacity, safety ratings, and its ability to keep you from falling. You should also make sure that it has good connection points. A safety harness can be used in conjunction with other PPE items, such as a headlamp or hard hat. A full body harness with a lanyard is the ideal option for workers who are working in hazardous environments. These harnesses are often made from materials like Kevlar, Nomex, and nylon. They can also be equipped with an internal shock-absorbing component to lessen the risk of tripping.
In addition to providing protection, a lanyard can be useful for storing tools and other objects. You can use the lanyard to tie your hands to a tree or ladder, for instance, and you can also use it to secure your work clothing. This can be especially helpful in hazardous environments, where workers are exposed to large amounts of heat.
The lanyard is usually worn around the neck, wrist, or ankle, and is attached to the top of the harness at the attachment point. It connects back to another attachment point at the bottom of the harness. A lanyard with an internal shock-absorbing component will help reduce the risk of tripping, while a double-leg lanyard can provide an additional support. During a fall, the lanyard will allow the wearer to move up and down and sidestep obstructions.
The lanyard's attachment point should be high enough to prevent a fall. If the lanyard becomes tangled with other equipment or objects, the worker may lose his balance. This can lead to injury or death. The lanyard should also be of a sufficient length. A fall-protection harness should be at least seven feet tall.
A safety lanyard is connected to a harness via a D-ring. The D-ring is typically a metal "D"-shaped ring, and the hardware must be corrosion-resistant. It must also hold a minimum of 5,000 pounds. A dorsal D-ring is attached to the chest, while side D-rings are attached to the hips. In order to attach to a harness, you must make sure that the D-rings are compatible. A lanyard can be made of leather or nylon. It can also be a braided rope or metal chain.
Working Safety Belt Arm Strap D-Ring HT-713
Safety belt is used in fall arrest protection. By linking the user to the work places tructure by belts around the fixed structure, user is allowed to do other operations . The product is applied in construction, power and telecommunications.
| PRODUCT CODE |
HT-713 |
| Product Type |
Concrete Anchor Strap |
| Webbing |
45mm Wide Polyester webbing stiiched with 70mm webbing |
| Strength |
18kN |
| Length |
1.0M,1.5M & 2M or as reguest |
| 1 small D-Ring at one end and a big D-Ring at other end |
| Individually inspect by QC |
English