Details when using industrial fall arrester cannot be ignored

The industrial fall arrester can quickly lock and lock the falling object within a limited interval, suitable for cargo lifting, maintaining the safety of the air operator and the damage of the object being lifted. It is different from the small anti-dropping device used in climbing. Be sure to pay attention when purchasing, otherwise it is a safety hazard. It can be applied to protect the safety of the suspended workpiece when the crane is hoisted, and can effectively maintain the life safety of the air operator and the damage of the suspended workpiece. It is used in metallurgical automobile manufacturing, petrochemical engineering, engineering establishment, electric power, Ships, communications, pharmaceuticals, bridges and other relatively high-performance workplaces. Fall prevention systems are divided into vertical life systems and degree life systems. Tighten the installation inspection. Check whether all the fasteners are strong. If there is looseness, it must be tightened. If the brake bolts are broken, they should be changed in time. If the brake rope is loose due to plastic elongation, it should be tightened again. The force is 1000KGF. Tightening installation should be coated with dense oil to prevent corrosion.

Industrial fall arresters are used in the construction industry. Its use management is closely related to our safety. Therefore, the safety requirements and quality requirements of industrial fall arresters are very high. In the initial installation, you need to be careful. A screw can cause an accident. In addition, the industrial fall arrester should be monitored and maintained safely every day during use to ensure that no problems will occur.

Every detail is very important for the construction elevator fall arrester. Doing it for repair and maintenance not only ensures the life and safety of the fall arrester but also ensures our own safety!